Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
product
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
product
  • Auto Titrator

    Supply with Combination Glass pH Electrode, Temperature Probe, pH Buffer (4.01, 7.00, 10.01), Beaker – 06 Nos., Push rod tool, Burette valve system 10mL, Stirrer Paddle – 03 Nos., Electrode holder system, Tubing 3.2 × 0.5 Dia – 02 Nos., Nut – 03 Nos., Glass bottle (1000 mL), Moisture Trap, Fuse – 02 Nos., USB Cable, Power Code, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

  • LMTB200 Turbidity Meter

    Turbidity meter LMTB200 with a Total Suspended Solids measurement mode, 2 to 7 points calibration, selectable 4 turbidity units, the meter is suitable for laboratory use

  • Model : µFlameCal10 | Make : ANALAB |

    Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

  • Conductivity Cell cc1,cc,2,cc3

    • Conductivity sensor measures the ability of a solution to conduct an electrical current
    • Presence of ions in a solution allows the solution to be conductive
    • Higher ion concentration results in higher conductivity
    • The same electrode can also be used to measure Resistivity, TDS, and Salinity of aqueous solutions (if supported by the meter)
    • Conductivity sensor selection should match the measuring range of the solution for accurate results
  • LMION40

    LMION40 is a high-accuracy meter, used for measuring the ION concentration, ORP and pH values of liquids. The meter widely used in environmental studies, chemical labs, swimming pools, etc.

  • LMWB04

    Water bath adopts new design structure, which could avoid the leakage of steam. There are pointer type temperature controller and intellectual type temperature controller for selecting. The intellectual temperature controller has high lightness digital display and key operating button, which is easy to operate. It has high precision on controlling the temperature

  • ANALAB Flame Photometer

    Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

  • Analab Multiparameter Analyzer

    Supplied with Combination Glass pH Electrode (0-70ºC), Conductivity Cell K=1.0, Standard Buffer Tablets, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

  • TDS Conductivity Meter

    Supplied with Conductivity Cell K = 1.0, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Instruction & Operational Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

  • Compact Cooling Centrifuges

    These newly developed compact bench top Cooling Centrifuges models CM-8 Plus and CM-12 Plus offers quiet operation with very small footprint. Centrifuge model CM-8 Plus is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, this unit is truly versatile Micro Centrifuge model CM-12 Plus is useful for routine applications in bio-technology, PCR, life sciences, bio-chemical and clinical labs etc. This unit is ideal for centrifugation with micro tubes from 0.2 ml upto 1.5 ml.

  • Choice™ PTFE (Hydrophobic) Syringe Filters

    Use Thermo Scientific™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering materials and fine particles down to the rated pore size.

    Adding a syringe filtration step prior to chromatographic injection not only helps to ensure more consistent and reliable results, it also helps to protect instruments and prolong column life. Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need.

  • Differential Blood Cell Counter 368

    Differential Blood Cell Counter Model-368 use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stabilityand is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.

  • Bath InDrycubator 352

    Dry Bath Incubator model 352 is a microcontroller based instrument  designed to control the heating of thermally conducting block. The block is fabricated to fit in 24 test tubes of 12mm dia. The test tubes contact the walls of the block to provide constant precise temperatures to the test tubes contents. The output of the heater is controlled by means of a precision temperature sensor and highly sensitive automatic electronic temperature controller.

  • Doctor Centrifuge

    These are low priced units meeting the majority of the small capacity centrifuging requirements of medical practitioners, pathological laboratories and hospitals for routine centrifuging tests. The units are fitted with resiliently mounted motor for vibration free performance having built in 5 step speed regulator. Available with Swing out or Angle rotor.

  • Mount on All Purpose stirrer

    • Model Number: RQM 122/R
    • Brand: Remi
    • Max. Stirring Capacity: 7 L
    • Speed Range [rpm]: 800 – 4000 rpm
    • Stirring Shaft * Length (mm): 250 mm
    • Motor Type: AC/DC 1/20 HP
    • Impeller Type: Pitched Fan
    • Impeller Diameter: 38 mm
  • Haemoglobin Meter 1315

    Microprocessor Haemoglobin Meter – 1315 is used to determine the haemoglobin concentration in the blood sample. The measurement haemoglobin concentration is carried out at wavelength of 546 nm. Using state-of-the-art LED technology the green light produced is projected through the sample and measured by sensitive photodiode. The measurements are made using cyanmethemoglobin method used through the world.Heamoglobin is an iron-containing protein found in the red blood cells. It enables the red cells, to carry oxygen from lungs to the rest of the body and carry carbon dioxide back. The haemoglobin level indicates the blood’s oxygen-carrying capacity and can play a major role in the early diagnosis of many illnesses such as thelsemia, sickle cell anemia, leukemia, malaria and hook worm etc.

  • Mini Centrifuge

    Lab Stirrers and Impellers | Laboratory Products | Lab Stirrers and Impellers Laboratory Stirrers REMI presents the next generation of laboratory stirrers for stirring / mixing etc of chemical. pharmaceutical, food and cosmetic products. The equipment basically consists of body. Chuck, stainless steel blade propeller and a U-type stand.

    10,500.00
  • Cyclomixers / Vortex Mixers

    • Designed for mixing liquids in Schools, Laboratories & Factories
    • Touch/ Continuous Operation mode Selection through bi-directional Switch
    • Speed Regulation through knob provided on the control panel
    • Interchangeable mixing heads for use with variety of tubes
    • Supplied with all interchangeable mixing heads
    10,800.00

Main Menu