-
Auto Titrator
Supply with Combination Glass pH Electrode, Temperature Probe, pH Buffer (4.01, 7.00, 10.01), Beaker – 06 Nos., Push rod tool, Burette valve system 10mL, Stirrer Paddle – 03 Nos., Electrode holder system, Tubing 3.2 × 0.5 Dia – 02 Nos., Nut – 03 Nos., Glass bottle (1000 mL), Moisture Trap, Fuse – 02 Nos., USB Cable, Power Code, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
LMTB200 Turbidity Meter
Turbidity meter LMTB200 with a Total Suspended Solids measurement mode, 2 to 7 points calibration, selectable 4 turbidity units, the meter is suitable for laboratory use
-
Model : µFlameCal10 | Make : ANALAB |
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Conductivity Cell cc1,cc,2,cc3
- Conductivity sensor measures the ability of a solution to conduct an electrical current
- Presence of ions in a solution allows the solution to be conductive
- Higher ion concentration results in higher conductivity
- The same electrode can also be used to measure Resistivity, TDS, and Salinity of aqueous solutions (if supported by the meter)
- Conductivity sensor selection should match the measuring range of the solution for accurate results
-
LMWB04
Water bath adopts new design structure, which could avoid the leakage of steam. There are pointer type temperature controller and intellectual type temperature controller for selecting. The intellectual temperature controller has high lightness digital display and key operating button, which is easy to operate. It has high precision on controlling the temperature
-
ANALAB Flame Photometer
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Analab Multiparameter Analyzer
Supplied with Combination Glass pH Electrode (0-70ºC), Conductivity Cell K=1.0, Standard Buffer Tablets, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
TDS Conductivity Meter
Supplied with Conductivity Cell K = 1.0, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Instruction & Operational Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Differential Blood Cell Counter 368
Differential Blood Cell Counter Model-368 use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stabilityand is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.
₹4,900.00 -
Magnetic Stirrer 1 liter
- Material: Stainless Steel
- Model Name: Magnetic Stirrer
- Brand: REMI
- Hotplate Surface: without hotplate
- Automatic Grade: Automatic
- Country of Origin: Made in India
- Availability: In Stock
₹7,300.00 -
Bath InDrycubator 352
Dry Bath Incubator model 352 is a microcontroller based instrument designed to control the heating of thermally conducting block. The block is fabricated to fit in 24 test tubes of 12mm dia. The test tubes contact the walls of the block to provide constant precise temperatures to the test tubes contents. The output of the heater is controlled by means of a precision temperature sensor and highly sensitive automatic electronic temperature controller.
₹8,500.00 -
Magnetic Stirrer 1 liter
Magnetic Stirrers with stainless steel top housing are most compact models. Permanent Magnet DC (PMDC) motor gives high torque even at lower speeds and maintains speed stability despite viscosity or volume changes. Different models available for all types of laboratory stirring applications up to 10 liters.
Magnetic Stirrers with hot plate are similar to the magnetic stirrers but have additional stainless steel hot plate. Heat energy is controlled by energy regulator.₹9,000.00 -
Haemoglobin Meter 1315
Microprocessor Haemoglobin Meter – 1315 is used to determine the haemoglobin concentration in the blood sample. The measurement haemoglobin concentration is carried out at wavelength of 546 nm. Using state-of-the-art LED technology the green light produced is projected through the sample and measured by sensitive photodiode. The measurements are made using cyanmethemoglobin method used through the world.Heamoglobin is an iron-containing protein found in the red blood cells. It enables the red cells, to carry oxygen from lungs to the rest of the body and carry carbon dioxide back. The haemoglobin level indicates the blood’s oxygen-carrying capacity and can play a major role in the early diagnosis of many illnesses such as thelsemia, sickle cell anemia, leukemia, malaria and hook worm etc.
₹9,900.00 -
Mini stirrer
Lab Stirrers and Impellers | Laboratory Products | Lab Stirrers and Impellers Laboratory Stirrers REMI presents the next generation of laboratory stirrers for stirring/mixing, etc of chemicals. pharmaceutical, food and cosmetic products. The equipment basically consists of the body. Chuck, stainless steel blade propeller and a U-type stand.
₹11,200.00 -
LMCM20H- Conductivity/TDS Meter
- Conductivity range – 0 to 20.0, 200.0, 2000µs/cm, 200.0mS/cm
- Big Screen & large LCD Display with white backlight.
- Memory- upto 100 readings.
- USB interface
- 0.001 Resolution.
- 3 points Calibration
₹25,000.00
















