-
Auto Titrator
Supply with Combination Glass pH Electrode, Temperature Probe, pH Buffer (4.01, 7.00, 10.01), Beaker – 06 Nos., Push rod tool, Burette valve system 10mL, Stirrer Paddle – 03 Nos., Electrode holder system, Tubing 3.2 × 0.5 Dia – 02 Nos., Nut – 03 Nos., Glass bottle (1000 mL), Moisture Trap, Fuse – 02 Nos., USB Cable, Power Code, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
LMTB200 Turbidity Meter
Turbidity meter LMTB200 with a Total Suspended Solids measurement mode, 2 to 7 points calibration, selectable 4 turbidity units, the meter is suitable for laboratory use
-
Model : µFlameCal10 | Make : ANALAB |
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Conductivity Cell cc1,cc,2,cc3
- Conductivity sensor measures the ability of a solution to conduct an electrical current
- Presence of ions in a solution allows the solution to be conductive
- Higher ion concentration results in higher conductivity
- The same electrode can also be used to measure Resistivity, TDS, and Salinity of aqueous solutions (if supported by the meter)
- Conductivity sensor selection should match the measuring range of the solution for accurate results
-
LMWB04
Water bath adopts new design structure, which could avoid the leakage of steam. There are pointer type temperature controller and intellectual type temperature controller for selecting. The intellectual temperature controller has high lightness digital display and key operating button, which is easy to operate. It has high precision on controlling the temperature
-
ANALAB Flame Photometer
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Analab Multiparameter Analyzer
Supplied with Combination Glass pH Electrode (0-70ºC), Conductivity Cell K=1.0, Standard Buffer Tablets, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
TDS Conductivity Meter
Supplied with Conductivity Cell K = 1.0, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Instruction & Operational Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Compact Cooling Centrifuges
These newly developed compact bench top Cooling Centrifuges models CM-8 Plus and CM-12 Plus offers quiet operation with very small footprint. Centrifuge model CM-8 Plus is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, this unit is truly versatile Micro Centrifuge model CM-12 Plus is useful for routine applications in bio-technology, PCR, life sciences, bio-chemical and clinical labs etc. This unit is ideal for centrifugation with micro tubes from 0.2 ml upto 1.5 ml.
-
Differential Blood Cell Counter 368
Differential Blood Cell Counter Model-368 use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stabilityand is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.
₹4,900.00 -
Magnetic Stirrer 1 liter
- Material: Stainless Steel
- Model Name: Magnetic Stirrer
- Brand: REMI
- Hotplate Surface: without hotplate
- Automatic Grade: Automatic
- Country of Origin: Made in India
- Availability: In Stock
₹7,300.00 -
Bath InDrycubator 352
Dry Bath Incubator model 352 is a microcontroller based instrument designed to control the heating of thermally conducting block. The block is fabricated to fit in 24 test tubes of 12mm dia. The test tubes contact the walls of the block to provide constant precise temperatures to the test tubes contents. The output of the heater is controlled by means of a precision temperature sensor and highly sensitive automatic electronic temperature controller.
₹8,500.00 -
Doctor Centrifuge
These are low priced units meeting the majority of the small capacity centrifuging requirements of medical practitioners, pathological laboratories and hospitals for routine centrifuging tests. The units are fitted with resiliently mounted motor for vibration free performance having built in 5 step speed regulator. Available with Swing out or Angle rotor.
₹9,000.00 -
Magnetic Stirrer 1 liter
Magnetic Stirrers with stainless steel top housing are most compact models. Permanent Magnet DC (PMDC) motor gives high torque even at lower speeds and maintains speed stability despite viscosity or volume changes. Different models available for all types of laboratory stirring applications up to 10 liters.
Magnetic Stirrers with hot plate are similar to the magnetic stirrers but have additional stainless steel hot plate. Heat energy is controlled by energy regulator.₹9,000.00 -
Mount on All Purpose stirrer
- Model Number: RQM 122/R
- Brand: Remi
- Max. Stirring Capacity: 7 L
- Speed Range [rpm]: 800 – 4000 rpm
- Stirring Shaft * Length (mm): 250 mm
- Motor Type: AC/DC 1/20 HP
- Impeller Type: Pitched Fan
- Impeller Diameter: 38 mm
₹9,000.00
















