-
Auto Titrator
Supply with Combination Glass pH Electrode, Temperature Probe, pH Buffer (4.01, 7.00, 10.01), Beaker – 06 Nos., Push rod tool, Burette valve system 10mL, Stirrer Paddle – 03 Nos., Electrode holder system, Tubing 3.2 × 0.5 Dia – 02 Nos., Nut – 03 Nos., Glass bottle (1000 mL), Moisture Trap, Fuse – 02 Nos., USB Cable, Power Code, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
LMTB200 Turbidity Meter
Turbidity meter LMTB200 with a Total Suspended Solids measurement mode, 2 to 7 points calibration, selectable 4 turbidity units, the meter is suitable for laboratory use
-
Model : µFlameCal10 | Make : ANALAB |
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Conductivity Cell cc1,cc,2,cc3
- Conductivity sensor measures the ability of a solution to conduct an electrical current
- Presence of ions in a solution allows the solution to be conductive
- Higher ion concentration results in higher conductivity
- The same electrode can also be used to measure Resistivity, TDS, and Salinity of aqueous solutions (if supported by the meter)
- Conductivity sensor selection should match the measuring range of the solution for accurate results
-
LMWB04
Water bath adopts new design structure, which could avoid the leakage of steam. There are pointer type temperature controller and intellectual type temperature controller for selecting. The intellectual temperature controller has high lightness digital display and key operating button, which is easy to operate. It has high precision on controlling the temperature
-
ANALAB Flame Photometer
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Analab Multiparameter Analyzer
Supplied with Combination Glass pH Electrode (0-70ºC), Conductivity Cell K=1.0, Standard Buffer Tablets, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
TDS Conductivity Meter
Supplied with Conductivity Cell K = 1.0, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Instruction & Operational Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Compact Cooling Centrifuges
These newly developed compact bench top Cooling Centrifuges models CM-8 Plus and CM-12 Plus offers quiet operation with very small footprint. Centrifuge model CM-8 Plus is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, this unit is truly versatile Micro Centrifuge model CM-12 Plus is useful for routine applications in bio-technology, PCR, life sciences, bio-chemical and clinical labs etc. This unit is ideal for centrifugation with micro tubes from 0.2 ml upto 1.5 ml.
-
Doctor Centrifuge
These are low priced units meeting the majority of the small capacity centrifuging requirements of medical practitioners, pathological laboratories and hospitals for routine centrifuging tests. The units are fitted with resiliently mounted motor for vibration free performance having built in 5 step speed regulator. Available with Swing out or Angle rotor.
₹9,000.00 -
Mount on All Purpose stirrer
- Model Number: RQM 122/R
- Brand: Remi
- Max. Stirring Capacity: 7 L
- Speed Range [rpm]: 800 – 4000 rpm
- Stirring Shaft * Length (mm): 250 mm
- Motor Type: AC/DC 1/20 HP
- Impeller Type: Pitched Fan
- Impeller Diameter: 38 mm
₹9,000.00 -
Mini Centrifuge
Lab Stirrers and Impellers | Laboratory Products | Lab Stirrers and Impellers Laboratory Stirrers REMI presents the next generation of laboratory stirrers for stirring / mixing etc of chemical. pharmaceutical, food and cosmetic products. The equipment basically consists of body. Chuck, stainless steel blade propeller and a U-type stand.
₹10,500.00 -
Cyclomixers / Vortex Mixers
- Designed for mixing liquids in Schools, Laboratories & Factories
- Touch/ Continuous Operation mode Selection through bi-directional Switch
- Speed Regulation through knob provided on the control panel
- Interchangeable mixing heads for use with variety of tubes
- Supplied with all interchangeable mixing heads
₹10,800.00 -
Lab Stirrers Impellers
REMI presents the next generation of laboratory stirrers for stirring / mixing etc of chemical. pharmaceutical, food and cosmetic products. The equipment basically consists of body. Chuck, stainless steel blade propeller and a U-type stand.
₹16,500.00 -
LMCM20H- Conductivity/TDS Meter
- Conductivity range – 0 to 20.0, 200.0, 2000µs/cm, 200.0mS/cm
- Big Screen & large LCD Display with white backlight.
- Memory- upto 100 readings.
- USB interface
- 0.001 Resolution.
- 3 points Calibration
₹25,000.00 -
Medico Plus Centrifug
The most popular model is now available with brushless motor, door safety interlock, digital speed indicator and timer. Ideal for routine centrifuging requirements of medical practitioners, diagnostic laboratories and hospitals.
₹26,000.00 -
Ice Maker
- 3 different size Ice cubes
- Large, Medium and Small (Selectable)
- Add water – indicator & Power Indicator
- “Ice Full” indicator
- CFC free compressor
- Ice Basket & Scoop for easy ice cube removal
- Noiseless operation
- Automatic run and easy to use.
- Compact Design and low maintenance
₹28,000.00 - 3 different size Ice cubes
